
Cisco Aironet 1130 AG Series Access Point

The Cisco Aironet 1130AG Series packages high capacity, high security, and enterprise-class features delivering wireless LAN access for a low total cost of ownership. Designed for wireless LAN coverage in offices and similar RF environments, this unobtrusive access point features integrated antennas and dual IEEE 802.11a/g radios for robust and predictable coverage, delivering a combined capacity of 108 Mbps. The competitively priced Cisco Aironet 1130AG Series is ready to install and easy to manage, reducing the cost of deployment and ongoing maintenance.
Overview
Cisco Aironet 1130AG Series IEEE 802.11a/b/g access points provide high-capacity, high-security, enterprise-class features in an unobtrusive, office-class design, delivering WLAN access with the lowest total cost of ownership. With high-performing dual IEEE 802.11a and 802.11g radios, the Cisco Aironet 1130AG Series provides a combined capacity of up to 108 Mbps to meet the needs of growing WLANs. Hardware-assisted Advanced Encryption Standard (AES) or temporal key integrity protocol (TKIP) encryption provides uncompromised support for interoperable IEEE 802.11i, Wi-Fi™ Protected Access 2 (WPA2) or WPA security. Supporting Cisco IOS® Software, the Cisco Aironet 1130AG Series is a component of the Cisco Structured Wireless-Aware Network (SWAN) framework, a comprehensive framework that delivers an integrated, end-to-end wired and wireless network. Using the radio and network management features of the Cisco SWAN framework for simplified deployment, along with built-in omnidirectional antennas that provide robust and predictable WLAN coverage for offices and similar RF environments, the competitively priced Cisco Aironet 1130AG Series is ready to install and easy to manage, reducing the cost of deployment and ongoing maintenance.
Features
Aironet Radio Technology
The Cisco Aironet 1130AG Series Access Point incorporates the next generation of Cisco Aironet radio innovation. Two high-performing radios provide simultaneous support for 802.11a and 802.11g standards, delivering 108 Mbps data rates in the 5 and 2.4 GHz bands to distances surpassing that of previous-generation radios. Operating on 15 nonoverlapping channels today, and 26 nonoverlapping channels with a future firmware release (channel support will depend on country regulations), the Cisco Aironet 1130AG Series avoids interference in congested airspace, simplifying the deployment of high-capacity networks. For smooth migration, the Cisco Aironet 1130AG Series takes full advantage of the dual-band capabilities of today’s WLAN clients, while providing full backward compatibility for legacy 802.11b clients.
Wireless Security Suite
The Cisco Aironet 1130AG Series is part of the award-winning Cisco Wireless Security Suite, which supports 802.11i, WPA2, WPA and numerous Extensible Authentication Protocol (EAP) types. WPA and WPA2 are the Wi-Fi Alliance® certifications for interoperable, standards-based WLAN security. These certifications support IEEE 802.1X for user-based authentication, TKIP for WPA encryption, and AES for WPA2 encryption. These certifications help to ensure interoperability between Wi-Fi-certified WLAN devices from different manufacturers.
Secure Encryption
The hardware-accelerated AES encryption of Cisco Aironet 1130AG Series access points supports enterprise-class, government-grade secure encryption over the WLAN without compromising performance. IEEE 802.1X authentication helps to ensure that only authorized users are allowed on the network. Backward compatibility for WPA client devices running TKIP, the RC4 encryption algorithm, is also supported by the Cisco Aironet 1130AG access point.
Designed for the Enterprise
Driven by Cisco IOS Software, the Cisco Aironet 1130AG Series is designed for enterprise networks. End-to-end Cisco IOS Software enables intelligent network services, which provide connectivity, scalability, and high availability for advanced enterprise applications. A component of the Cisco SWAN framework, the Cisco Aironet 1130AG Series extends the security, scalability, reliability, ease of deployment, and manageability available in wired networks to the WLAN.
Optimal Value for Offices
The Cisco Aironet 1130AG Series delivers optimal value for offices and similar environments. Built-in antennas provide omnidirectional coverage specifically designed for today’s open workspaces. A multipurpose mounting bracket easily secures Cisco Aironet 1130AG Series access points to ceilings and walls. With an unobtrusive design, Cisco Aironet 1130AG Series access points are aesthetically pleasing and blend into their environments. Centrally manageable by the Cisco SWAN management device—the Cisco Wireless LAN Solution Engine (WLSE)—Cisco Aironet 1130AG Series access points can be systematically and dynamically configured to maximize total network performance. Offered at a competitive price, and optimized for easy installation and operation, the Cisco Aironet 1130AG Series helps organizations attain a lower total cost of ownership.
Wireless Specifications
Wireless Technology Wi-Fi - IEEE 802.11a/b/g
Antenna
- 1 x 3dBi Omni-directional Antenna Integrated
- 1 x 4.5dBi Omni-directional Antenna Integrated
Antenna Range
- 80 ft@ 54Mbps Indoors IEEE 802.11a
- 325 ft@ 6Mbps Indoors IEEE 802.11a
- 100 ft@ 54Mbps Outdoors IEEE 802.11a
- 650 ft@ 6Mbps Outdoors IEEE 802.11a
- 100 ft@ 54Mbps Indoors IEEE 802.11g
- 400 ft@ 6Mbps Indoors IEEE 802.11g
- 120 ft@ 54Mbps Outdoors IEEE 802.11g
- 900 ft@ 6Mbps Outdoors IEEE 802.11g
- 360 ft@ 11Mbps Indoors IEEE 802.11b
- 450 ft@ 1 Mbps Indoors IEEE 802.11b
- 820 ft@ 11Mbps Outdoors IEEE 802.11b
- 950 ft@ 1 Mbps Outdoors IEEE 802.11b
Frequency Band/Bandwidth
- 2.41 GHz to 2.46 GHz IEEE 802.11b/g ISM Band FCC
- 5.15 GHz to 5.35 GHz IEEE 802.11a FCC
- 5.72 GHz to 5.82 GHz IEEE 802.11a FCC
Channels
- 11 ChannelIEEE 802.11b/g FCC
- 12 ChannelIEEE 802.11a FCC
- Up to 19 ChannelNon-overlapping IEEE 802.11a
- 3 ChannelNon-overlapping IEEE 802.11b/g
Transmission Speed 108Mbps
Transmission Speed Details
- 108Mbps 2x Mode
- 54Mbps Auto-fallback IEEE 802.11a/g
- 6Mbps IEEE 802.11a/g
- 11Mbps Auto-fallback IEEE 802.11b
- 1Mbps IEEE 802.11b
Wireless Security
- WEP encryption length: 40/128-bits
- IEEE 802.11i
- IEEE 802.1x
- WPA
- WPA2
Modulation
IEEE 802.11a:
- OFDM
IEEE 802.11b:
- CCK
IEEE 802.11g:
- OFDM
Interfaces/Ports
Interfaces/Ports 1 x RJ-45 10/100Base-T Auto-sensing LAN
Management & Protocols
- BootP
- Secure Shell (SSH) Protocol
- Secure HTTP (HTTPS)
- Trivial File Transfer Protocol (TFTP)
- FTP
- Telnet
- Console port
- Simple Network Management Protocol (SNMP) MIB I and MIB II
- coWorks Resource Manager Essentials (RME)
- coWorks Software Image Manager (SWIM)
- oWorks Campus Manager
- coWorks CiscoView
- CiscoWorks WLSE
Security Features
- TKIP
- Message integrity check (MIC)
- MAC address authentication
- LEAP
- EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
- Protected EAP- Generic Token Card (PEAP-GTC)
- PEAP-Microsoft Challenge Authentication Protocol Version 2 (PEAP-MSCHAPv2)
- EAP-Transport Layer Security (EAP-TLS)
- EAP-Tunneled TLS (EAP-TTLS)
- EAP-Subscriber Identity Module (EAP-SIM)
- AES
- AES-CCMP encryption
- RC4 encryption
- Extensible Authentication Protocol (EAP)
Power Description
Input Voltage
- 100 V AC to 240 V AC Power Supply
- 36 V DC to 57 V DC Device
Physical Characteristics
Dimensions 7.5" Height x 7.5" Width x 1.3" Depth
Weight 1.5 lb
Miscellaneous
Package Contents
Cisco Aironet 1130AG IEEE 802.11a/b/g Lightweight Access Point
Mounting hardware kit
- 1 x mounting plate
- 2 x suspended ceiling adjustable T-rail clips (accomodates standard and recessed T-rails)
- 1 x security hasp adapter
- 4 x flat head Phillips machine screws
- 1 x pan head Phillips machine screw
- 2 x plastic wall anchors
- 2 x pan head screws
- Product quick start guide
- Translated safety warnings document
- Cisco product registration and Cisco documentation feedback cards
Additional Information
- For Aironet 1130AG IEEE 802.11a/b/g Lightweight Access Point a WLAN controller is required
Lightweight Access Point Protocol (LWAPP):
- Automatically detects the best available Cisco wireless LAN controller to download appropriate policies and configuration information with no hands-on intervention.
Antennas Frequency Band:
- 2.4 GHz
- 5 GHz
Certifications & Standards
- IEEE 802.11a
- IEEE 802.11b
- IEEE 802.11g
- IEEE 802.3
- IEEE 802.11i
- IEEE 802.1x
- Wi-Fi
Safety:
- UL 60950-1
- CAN/CSA-C22.2 No. 60950-1
- UL 2043
- IEC 60950-1
- EN 60950-1
Radio Approvals:
- FCC Part 15.247
- FCC Part 15.407
- RSS-210 (Canada)
- EN 300.328 (Europe)
- EN 301.893 (Europe)
EMI and Susceptibility (Class B):
- FCC Part 15.107
- FCC Part 15.109
- ICES-003 (Canada)
- EN 301.489-1(Europe)
- EN 301.489-17 (Europe)
Cisco Aironet 1130 AG Series Access Point Models
| Part Number | Description | Buy Now! | Price |
|---|---|---|---|
| AIR-AP1131AG-A-K9 | CISCO AIR-AP1131AG-A-K9 Wireless Access Point | $611 | |
| AIR-LAP1131AG-A-K9 | CISCO AIR-LAP1131AG-A-K9 Wireless Lightweight Access Point | $611 |
