Bridgewave AR80X & AR80 Wireless Bridges

Bridgewave AR80 & AR80X

BridgeWave is the leading supplier of gigabit RF connectivity solutions for service provider, government, military and enterprise applications. BridgeWave Gigabit Ethernet links extend network operator fiber to provide high-capacity access and backhaul, as well as extending enterprise LANs between buildings and sites.

Full Bridgewave AR80 & AR80X Specification

Specifications AR80 AR80X
Operating Mode 1000 Mbps full-duplex, 100 Mbps full-duplex, 1000/100 Mbps AdaptRate
AdaptRate &
AdaptPath Switching
Normal operation: 1000 Mbps / Path fade mode: 100 Mbps / Secondary link: Dependant of user supplied product capability
Switching time: 50 milliseconds
AdaptRate switch point: -57dBm / -59dBm
AdaptPath switch point: Configurable
Data Rate 1000 Mbps 100 Mbps 1000 Mbps 100 Mbps
1000 Mbps full duplex 100 Mbps full duplex 1000 Mbps full duplex 100 Mbps full duplex
Latency < 40 uSec < 220 uSec < 40 uSec < 220 uSec
Link Budget 168dB @ 10-12 BER 179dB @ 10-12 BER 182dB @ 10-12 BER 193dB @ 10-12 BER
RF Interface 72.5GHz/82.5GHz (FDD), digitally modulated (BFSK) with forward error correction RS(204,188)
1.4GHz bandwidth 140MHz bandwidth 1.4GHz bandwidth 140MHz bandwidth
Min. link distance 328 ft (100 m) Min. link distance 1,312 ft (400 m)
256-Bit AES Encryption option (see Advanced Security datasheet for details)
Antenna External 12 in (31 cm) directional cassegrain External 24 in (62 cm) directional cassegrain
Linear polarized (H/V), 44dBi gain, 0.8° beam Linear polarized (H/V), 51dBi gain, 0.4° beam
Ethernet Interfaces 1000base-SX with LC connectors - up to 270m 62.5/125μm MMF, or 500m 50/125μm MMF
10/100base-TX with RJ-45 connector (with integral surge suppressor) - up to 100m Cat5 cable
Maximum Ethernet frame length: 1632 bytes
Management Web-based (HTML) embedded management agent: setup, security, status, statistics, software update
Secure Management Access (see Advanced Security datasheet for details)
SNMP support: MIB-II and BridgeWave enterprise MIB
Voltmeter test points: Receive Signal Level and Link Quality
RADIUS Authentication, SysLog support
Power Supplied 100 – 240 VAC input, +24VDC output, indoor rated power supply (0°C to +40°C). 45watts max. consumption
-48VDC input option with user supplied power supply, 45watts max. consumption
Max. cable length: 650 ft (200m) with 12AWG 400 ft (125m) with 14AWG, stranded wires highly recommended (surge suppressor required)
Mount Fine-adjust pole mount: 3.5-4.5in (8.9-11.4cm) OD -- SCH40 or higher Fine-adjust pole mount: 3.5-4.5in (8.9-11.4cm) OD -- SCH40 or higher
Size Radio/antenna unit: 20w * 14h * 10d (in) / 50w * 36h * 25d (cm) Radio/antenna unit: 24w * 24h * 20d (in) / 62w * 62h * 50d (cm)
Weight Radio with antenna and mount: 22 lbs (10 kg) Radio with antenna and mount: 38.5 lbs (17.5 kg)
Environmental Operating temperature: -33 to +55 °C (-27 to 131 °F)
Operating altitude: 14,764 ft maximum (4,500 m)
Wind Loading 60 lbs. force @ 100 MPH 120 lbs. force @ 100 MPH
Regulatory Safety: UL Listed, CE Mark, EN60950, meets FCC 1.1310 general population RF MPE limits
RF Certifications: EN302217 (2008-11), U.S. FCC Part 15.255, Industry Canada RSS-210
Install Kit Voltmeter test cable, power connectors

Copyright © 1996 - 2010
eTribeca, LLC. All rights reserved.
Operated under license by eTribeca
Revised: March 02, 2010